EXTENSION HOUSING PARTS ASSEMBLY

id051100011600

1.  Assemble in the order shown in the figure.

bmm8um00000041

1	Extension housing
2	Oil seal (control rod) (See Oil Seal (Control Rod) Assembly Note.)
3	Snap ring
4	Washer
5	Spring (See Spring, Spindle Assembly Note.)
6	Spindle (See Spring, Spindle Assembly Note.)
7	Snap ring (See Snap Ring Assembly Note.)
8	Gasket
9	Spring cap
10	Guide plate
11	Oil guide
12	Spring
13	Control rod end
14	Control rod (See Control Rod Assembly Note.)

Oil Seal (Control Rod) Assembly Note

1.  Secure the extension housing to the vice.

bmm6jm00000106

2.  Assemble the new oil seal (control rod) using the SST and a hammer.

bmm6jm00000079

Spring, Spindle Assembly Note

Note

•  Verify the length during assembly because the left and right parts of the spring and spindle have different lengths.

1.  Verify the length of the spring and spindle and assemble the shorter one to the left side shown in the figure and the longer one to the right side shown in the figure.

bmm8um00000042

Snap Ring Assembly Note

1.  While pressing the spindle in the direction of the arrow, assemble a new snap ring.

bmm8um00000040

Control Rod Assembly Note

1.  While compressing the spring in the direction of the arrow, assemble the control rod to the spring and the control rod end.

bmm8um00000039