BATTERY [SKYACTIV-G 1.5, SKYACTIV-G 2.0]

id0117t2185200

Purpose, Function

• The battery stores electricity generated by the generator. In addition, it supplies power to electronic devices if necessary.

• The battery for vehicles with i-stop is an exclusive product with enhanced charge recovery and is highly durable.

Construction

• The battery is located in the engine compartment (vehicle left).

amxzzn00000736

Fail-safe

DTC

Fail-safe

P057F:00

•  Inhibits engine-stop by operating the i-stop function. (Vehicles with i-stop system)

•  Inhibits the i-ELOOP control. (Vehicles with i-stop system)

P0A0F:00

•  Flashes the i-stop warning light (amber) and inhibits engine-stop by operating the i-stop function. (Vehicles with i-stop system)

P0A8D:00

•  Inhibits engine-stop by operating the i-stop function. (Vehicles with i-stop system)

•  Inhibits the i-ELOOP control. (Vehicles with i-stop system)

P0A8F:00

P2502:00

•  Generator control is inhibited. (Vehicles without i-ELOOP)

•  Inhibits engine-stop by operating the i-stop function. (Vehicles with i-ELOOP)

•  Generator switch to default mode requested (14.5 V constant voltage power generation). (Vehicles with i-ELOOP)

•  Transition to i-ELOOP bypass mode. (Vehicles with i-ELOOP)

P2503:00

P2504:00

•  Generator control is inhibited. (Vehicles without i-ELOOP)

•  Inhibits engine-stop by operating the i-stop function. (Vehicles with i-ELOOP)

•  Generator switch to default mode requested. If the temperature of the generator exceeds the specified value, the generator itself stops power generation. But, if the internal circuit of the generator is malfunctioning, the generator may not accept the demand from the PCM. (Vehicles with i-ELOOP)

DTC	Fail-safe
P057F:00	• Inhibits engine-stop by operating the i-stop function. (Vehicles with i-stop system) • Inhibits the i-ELOOP control. (Vehicles with i-stop system)
P0A0F:00	• Flashes the i-stop warning light (amber) and inhibits engine-stop by operating the i-stop function. (Vehicles with i-stop system)
P0A8D:00	• Inhibits engine-stop by operating the i-stop function. (Vehicles with i-stop system) • Inhibits the i-ELOOP control. (Vehicles with i-stop system)
P0A8F:00
P2502:00	• Generator control is inhibited. (Vehicles without i-ELOOP) • Inhibits engine-stop by operating the i-stop function. (Vehicles with i-ELOOP) • Generator switch to default mode requested (14.5 V constant voltage power generation). (Vehicles with i-ELOOP) • Transition to i-ELOOP bypass mode. (Vehicles with i-ELOOP)
P2503:00
P2504:00	• Generator control is inhibited. (Vehicles without i-ELOOP) • Inhibits engine-stop by operating the i-stop function. (Vehicles with i-ELOOP) • Generator switch to default mode requested. If the temperature of the generator exceeds the specified value, the generator itself stops power generation. But, if the internal circuit of the generator is malfunctioning, the generator may not accept the demand from the PCM. (Vehicles with i-ELOOP)