REAR WHEEL HUB BOLT REPLACEMENT

id031200800200

1.  Remove the rear brake caliper component and suspend it in a place out of the way using a cable. (See REAR BRAKE DISC REMOVAL/INSTALLATION.)

amxuuw00004738

2.  Remove the rear disc plate. (See REAR BRAKE DISC REMOVAL/INSTALLATION.)

3.  Remove the rear wheel hub bolt using the SST as shown in the figure.

amxuuw00004739

4.  Place a new rear wheel hub bolt in the wheel hub component.

5.  Install the rear wheel hub bolt by placing an appropriate-sized washer on the wheel hub component and tightening the wheel nut as shown in the figure.

amxuuw00004740