FRONT BRAKE CALIPER REMOVAL/INSTALLATION [WITH 4-POT OPPOSED PISTON CALIPER]

id0411000003v8

1.  Remove in the order indicated in the table.

2.  Install in the reverse order of removal.

3.  After installation, add brake fluid, bleed the air, and inspect for fluid leakage. (See BRAKE FLUID AIR BLEEDING.)

4.  Depress the brake pedal a few times, rotate the wheel by hand, and verify that the brake does not drag.

amxuuw00006121

1	Bolt
2	Brake hose
3	Pin (See Pin Removal Note.)
4	Clip
5	Disc pad component (See Disc Pad Components Installation Note.)
6	Bolt
7	Front brake caliper (See Front Brake Caliper Installation Note.)

Pin Removal Note

1.  Remove the pins in the direction of the arrow shown in the figure using a pin punch and hammer.

amxzzw00005050

Front Brake Caliper Installation Note

1.  Install the bleeder screws with them pointed to the upper side of the vehicle.

amxuuw00006123

Disc Pad Components Installation Note

1.  Clean the exposed area of the piston.

2.  Push the piston in using the commercially available disc brake expand tool.

amxuuw00006124

3.  Install the disc pad components to the caliper.