DTC U3000:16/U3000:1C/U3000:28/U3000:41/U3000:46/U3000:47/U3000:49/U3000:4B/U3000:61/U3000:64/U3000:73/U3000:96 [EPS CONTROL MODULE]

id060230835300

DTC	U3000:16	EPS control module
	U3000:1C
	U3000:28
	U3000:41
	U3000:46
	U3000:47
	U3000:49
	U3000:4B
	U3000:61
	U3000:64
	U3000:73
	U3000:96
DETECTION CONDITION		•  Internal malfunction detected in EPS control module.
FAIL-SAFE FUNCTION		•  Refer to “Fail-safe function table”. (See DTC TABLE [EPS CONTROL MODULE].)
POSSIBLE CAUSE		•  EPS control module malfunction
SYSTEM WIRING DIAGRAM		—

Diagnostic Procedure

Step	Inspection		Action
1	VERIFY EPS CONTROL MODULE DTC •  Using the M-MDS, clear the DTC from the EPS control module. (See CLEARING DTC [EPS CONTROL MODULE].) •  Using the M-MDS, perform the EPS control module DTC inspection. (See DTC INSPECTION [EPS CONTROL MODULE].) •  Is the same Pending DTC present?	Yes	Replace the EPS control module, then go to the next step. (See ELECTRIC POWER STEERING (EPS) CONTROL MODULE REMOVAL/INSTALLATION.)
		No	Go to the next step.
2	VERIFY NO DTC IS PRESENT •  Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [EPS CONTROL MODULE].)
		No	DTC troubleshooting completed.