DTC B1206:00/B143A:00/U2107:00 [SAS CONTROL MODULE (AIR BAG SYSTEM)]

id0802h3005000

System malfunction location

•  B1206:00: SAS control module collision judgement signal output (fuel cut off signal output)

•  B143A:00: SAS control module collision judgement signal output (collision detection signal output)

•  U2107:00: SAS control module collision judgement signal output (ESS signal output)

Detection condition

Warning

•  Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

•  SAS control module output collision judgement signal

Fail-safe

—

Possible cause

•  SAS control module output collision judgement signal

•  SAS control module malfunction

System wiring diagram

—

System malfunction location	• B1206:00: SAS control module collision judgement signal output (fuel cut off signal output) • B143A:00: SAS control module collision judgement signal output (collision detection signal output) • U2107:00: SAS control module collision judgement signal output (ESS signal output)
Detection condition	Warning • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure. • SAS control module output collision judgement signal
Fail-safe	—
Possible cause	• SAS control module output collision judgement signal • SAS control module malfunction
System wiring diagram	—

Diagnostic Procedure

ACTION

• Replace the SAS control module.
(See SAS CONTROL MODULE REMOVAL/INSTALLATION.)