PID/DATA MONITOR TABLE [SAS CONTROL MODULE (AIR BAG SYSTEM)]

id0802h3081000

PID

Unit/Condition

Data contents

SAS control module terminal

AB_WL

(Air bag system warning light status)

Lamp_Off/Lamp_On/Plant_Mode/Unknown

•  Air bag system warning light off: Lamp_Off

•  Air bag system warning light on: Lamp_On

•  Air bag system warning light flashing: Plant_Mode

•  Air bag system warning light status unrecognized: Unknown

3Q, 3S

OCS_DTC_CLR

(Occupant classification sensor DTC cleared status)

Starting/Normal End/In Process/OCS Fault

Fault information cleared status occupant classification sensor

3Q, 3S

P_OCS_ST

(Occupant classification sensor status)

Empty/SMALL/Indeterminate/LARGE

Occupant classification status determinated by occupant classification sensor

3Q, 3S

P_SEAT_M_S

(Occupancy sensor)

Off/On

•  Not occupant seated in passenger-side seat: Off

•  Occupant seated in passenger-side seat: On

2AA

PCD_A

(Poorly connected detector bar terminal voltage nominal (SAS control module connector A))

V

•  Normal connected: 0.27 V or less

•  Poor connected: 3.17 V or more

1a, 1b

PCD_B

(Poorly connected detector bar terminal voltage nominal (SAS control module connector B))

V

•  Normal connected: 0.27 V or less

•  Poor connected: 3.17 V or more

2a, 2b

PCD_C

(Poorly connected detector bar terminal voltage nominal (SAS control module connector C))

V

•  Normal connected: 0.27 V or less

•  Poor connected: 3.17 V or more

3a, 3b

RES_F_AB1_D

(Driver-side air bag module (inflatorNo.1) resistance nominal)

ohm

Continuous: 1.37–6.33 ohms

3C, 3G

RES_F_AB1_P

(Passenger-side air bag module (inflatorNo.1) resistance nominal)

ohm

Continuous: 0.88–6.33 ohms

3K, 3N

RES_S_AB_D

(Driver-side side air bag module resistance nominal)

ohm

Continuous: 0.88–10.53 ohms

1C, 1G

RES_S_AB_P

(Passenger-side side air bag module resistance nominal)

ohm

Continuous: 0.88–10.53 ohms

1K, 1N

RES_SB_P_D

(Driver-side pre-tensioner seat belt resistance nominal)

ohm

Continuous: 0.88–6.33 ohms

2C, 2G

RES_SB_P_P

(Passenger-side pre-tensioner seat belt resistance nominal)

ohm

Continuous: 0.88–6.33 ohms

2K, 2N

SEAT_B_D

(Driver-side buckle switch status)

Unbuckled/Buckled

•  Driver-side seat belt fastened (Driver-side buckle switch off): Buckled

•  Driver-side seat belt not fastened (Driver-side buckle switch on): Unbuckled

2U

SEAT_B_P

(Passenger-side buckle switch status)

Unbuckled/Buckled

•  Passenger-side seat belt fastened (Passenger-side buckle switch off): Buckled

•  Passenger-side seat belt not fastened (Passenger-side buckle switch on): Unbuckled

2W

VPWR_IGA

(SAS control module power voltage)

V

Ignition is switched ON: IG1 voltage

2AD

PID	Unit/Condition	Data contents	SAS control module terminal
AB_WL (Air bag system warning light status)	Lamp_Off/Lamp_On/Plant_Mode/Unknown	• Air bag system warning light off: Lamp_Off • Air bag system warning light on: Lamp_On • Air bag system warning light flashing: Plant_Mode • Air bag system warning light status unrecognized: Unknown	3Q, 3S
OCS_DTC_CLR (Occupant classification sensor DTC cleared status)	Starting/Normal End/In Process/OCS Fault	Fault information cleared status occupant classification sensor	3Q, 3S
P_OCS_ST (Occupant classification sensor status)	Empty/SMALL/Indeterminate/LARGE	Occupant classification status determinated by occupant classification sensor	3Q, 3S
P_SEAT_M_S (Occupancy sensor)	Off/On	• Not occupant seated in passenger-side seat: Off • Occupant seated in passenger-side seat: On	2AA
PCD_A (Poorly connected detector bar terminal voltage nominal (SAS control module connector A))	V	• Normal connected: 0.27 V or less • Poor connected: 3.17 V or more	1a, 1b
PCD_B (Poorly connected detector bar terminal voltage nominal (SAS control module connector B))	V	• Normal connected: 0.27 V or less • Poor connected: 3.17 V or more	2a, 2b
PCD_C (Poorly connected detector bar terminal voltage nominal (SAS control module connector C))	V	• Normal connected: 0.27 V or less • Poor connected: 3.17 V or more	3a, 3b
RES_F_AB1_D (Driver-side air bag module (inflatorNo.1) resistance nominal)	ohm	Continuous: 1.37–6.33 ohms	3C, 3G
RES_F_AB1_P (Passenger-side air bag module (inflatorNo.1) resistance nominal)	ohm	Continuous: 0.88–6.33 ohms	3K, 3N
RES_S_AB_D (Driver-side side air bag module resistance nominal)	ohm	Continuous: 0.88–10.53 ohms	1C, 1G
RES_S_AB_P (Passenger-side side air bag module resistance nominal)	ohm	Continuous: 0.88–10.53 ohms	1K, 1N
RES_SB_P_D (Driver-side pre-tensioner seat belt resistance nominal)	ohm	Continuous: 0.88–6.33 ohms	2C, 2G
RES_SB_P_P (Passenger-side pre-tensioner seat belt resistance nominal)	ohm	Continuous: 0.88–6.33 ohms	2K, 2N
SEAT_B_D (Driver-side buckle switch status)	Unbuckled/Buckled	• Driver-side seat belt fastened (Driver-side buckle switch off): Buckled • Driver-side seat belt not fastened (Driver-side buckle switch on): Unbuckled	2U
SEAT_B_P (Passenger-side buckle switch status)	Unbuckled/Buckled	• Passenger-side seat belt fastened (Passenger-side buckle switch off): Buckled • Passenger-side seat belt not fastened (Passenger-side buckle switch on): Unbuckled	2W
VPWR_IGA (SAS control module power voltage)	V	Ignition is switched ON: IG1 voltage	2AD