CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE

id092000013100

Door Locks Systems

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Vehicle] on the center display.

4. Select [Door Lock] on the center display.

5. Select an item name, and then select option.

Power Door Lock System

Display of center display

Function

Initial setting

Settings

Control module

Auto Door Lock Mode

Auto door lock function can be changed.

Lock: When Driving, Unlock: IGN Off or Lock: When Driving^*1

Off / Lock: When Driving, Unlock: In Park / Lock: When Driving / Lock: When Driving, Unlock: IGN Off / Lock: Shifting from Park / Lock: Shifting from Park, Unlock: In Park

BCM

Reset

Returns the setting content of the door lock system to the initial setting.

No

No / Yes

• Start stop unit

• BCM

Display of center display	Function	Initial setting	Settings	Control module
Auto Door Lock Mode	Auto door lock function can be changed.	Lock: When Driving, Unlock: IGN Off or Lock: When Driving^*1	Off / Lock: When Driving, Unlock: In Park / Lock: When Driving / Lock: When Driving, Unlock: IGN Off / Lock: Shifting from Park / Lock: Shifting from Park, Unlock: In Park	BCM
Reset	Returns the setting content of the door lock system to the initial setting.	No	No / Yes	• Start stop unit • BCM

*1 :The initial value differs depending on the market.

Advanced keyless entry system

Display of center display

Function

Initial setting

Settings

Control module

Keyless Lock Beep Volume

The keyless beeper volume can be adjusted.

Off or Medium^*1

High / Medium / Low / Off

Start stop unit

Auto Relock Time

The operation start time of the auto re-lock function can be changed.

30 seconds

30 seconds / 60 seconds / 90 seconds

Start stop unit

Walk Away Lock

The out-of-area (reception area) type auto lock function can be set.

Off

Off / On

Start stop unit

Reset

Returns the setting content of the door lock system to the initial setting.

No

No / Yes

• Start stop unit

• BCM

Display of center display	Function	Initial setting	Settings	Control module
Keyless Lock Beep Volume	The keyless beeper volume can be adjusted.	Off or Medium^*1	High / Medium / Low / Off	Start stop unit
Auto Relock Time	The operation start time of the auto re-lock function can be changed.	30 seconds	30 seconds / 60 seconds / 90 seconds	Start stop unit
Walk Away Lock	The out-of-area (reception area) type auto lock function can be set.	Off	Off / On	Start stop unit
Reset	Returns the setting content of the door lock system to the initial setting.	No	No / Yes	• Start stop unit • BCM

*1 :The initial value differs depending on the market.

Keyless entry system

Display of center display

Function

Initial setting

Settings

Control module

Auto Relock Time

The operation start time of the auto re-lock function can be changed.

30 seconds

30 seconds / 60 seconds / 90 seconds

Start stop unit

Reset

Returns the setting content of the door lock system to the initial setting.

No

No / Yes

• Start stop unit

• BCM

Display of center display	Function	Initial setting	Settings	Control module
Auto Relock Time	The operation start time of the auto re-lock function can be changed.	30 seconds	30 seconds / 60 seconds / 90 seconds	Start stop unit
Reset	Returns the setting content of the door lock system to the initial setting.	No	No / Yes	• Start stop unit • BCM

Lighting Systems

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Vehicle] on the center display.

4. Select [Lighting] on the center display.

5. Select an item name, and then select option.

Room light control system

Display of center display

Function

Initial setting

Settings

Control module

Interior Light Timeout - Doors Open

•  The map light illumination time after any door is opened can be changed.

•  The trunk compartment light illumination time after the trunk lid is opened can be changed.

30 minutes

60 minutes / 30 minutes / 10 minutes

BCM

Interior Light Timeout - Doors Closed

The map light illumination time after all the doors are closed can be changed.

15 seconds

60 seconds / 30 seconds / 15 seconds / 7.5 seconds

BCM

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  BCM

•  FSC

•  Instrument cluster

•  Adaptive front lighting system (AFS) control module

Display of center display	Function	Initial setting	Settings	Control module
Interior Light Timeout - Doors Open	• The map light illumination time after any door is opened can be changed. • The trunk compartment light illumination time after the trunk lid is opened can be changed.	30 minutes	60 minutes / 30 minutes / 10 minutes	BCM
Interior Light Timeout - Doors Closed	The map light illumination time after all the doors are closed can be changed.	15 seconds	60 seconds / 30 seconds / 15 seconds / 7.5 seconds	BCM
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• BCM • FSC • Instrument cluster • Adaptive front lighting system (AFS) control module

High beam control (HBC) system

Display of center display

Function

Initial setting

Settings

Control module

High Beam Control

The high beam control (HBC) system can be switched between operable and inoperable.

On

On / Off

FSC

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  BCM

•  FSC

•  Instrument cluster

•  Adaptive front lighting system (AFS) control module

Display of center display	Function	Initial setting	Settings	Control module
High Beam Control	The high beam control (HBC) system can be switched between operable and inoperable.	On	On / Off	FSC
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• BCM • FSC • Instrument cluster • Adaptive front lighting system (AFS) control module

Adaptive front lighting system (AFS)

Display of center display

Function

Initial setting

Settings

Control module

Adaptive Front-lighting System

The adaptive front lighting system (AFS) can be switched between operable and inoperable.

On

On / Off

Adaptive front lighting system (AFS) control module

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  BCM

•  FSC

•  Instrument cluster

•  Adaptive front lighting system (AFS) control module

Display of center display	Function	Initial setting	Settings	Control module
Adaptive Front-lighting System	The adaptive front lighting system (AFS) can be switched between operable and inoperable.	On	On / Off	Adaptive front lighting system (AFS) control module
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• BCM • FSC • Instrument cluster • Adaptive front lighting system (AFS) control module

Lights-on reminder warning alarm

Display of center display

Function

Initial setting

Settings

Control module

Light On Reminder Vol

The volume for the lights-on reminder warning alarm can be changed.

High

High / Low / Off

Instrument cluster

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  BCM

•  FSC

•  Instrument cluster

•  Adaptive front lighting system (AFS) control module

Display of center display	Function	Initial setting	Settings	Control module
Light On Reminder Vol	The volume for the lights-on reminder warning alarm can be changed.	High	High / Low / Off	Instrument cluster
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• BCM • FSC • Instrument cluster • Adaptive front lighting system (AFS) control module

Running light system

Display of center display

Function

Initial setting

Settings

Control module

Daytime Running Lights

The running light system function can be set.

On

On / Off

BCM

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  BCM

•  FSC

•  Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Daytime Running Lights	The running light system function can be set.	On	On / Off	BCM
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• BCM • FSC • Instrument cluster

Auto light system

Display of center display

Function

Initial setting

Settings

Control module

Auto Headlight On

Auto light sensor sensitivity can be changed.

Medium

Light / Medium Light / Medium / Medium Dark / Dark

BCM

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  BCM

•  FSC

•  Instrument cluster

•  Adaptive front lighting system (AFS) control module

Display of center display	Function	Initial setting	Settings	Control module
Auto Headlight On	Auto light sensor sensitivity can be changed.	Medium	Light / Medium Light / Medium / Medium Dark / Dark	BCM
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• BCM • FSC • Instrument cluster • Adaptive front lighting system (AFS) control module

Coming home light system

Display of center display

Function

Initial setting

Settings

Control module

Coming Home Lights Timer

The coming home light system operation time can be switched.

30 seconds

Off / 30 seconds / 60 seconds / 90 seconds / 120 seconds

BCM

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  BCM

•  FSC

•  Instrument cluster

•  Adaptive front lighting system (AFS) control module

Display of center display	Function	Initial setting	Settings	Control module
Coming Home Lights Timer	The coming home light system operation time can be switched.	30 seconds	Off / 30 seconds / 60 seconds / 90 seconds / 120 seconds	BCM
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• BCM • FSC • Instrument cluster • Adaptive front lighting system (AFS) control module

Leaving home light system

Display of center display

Function

Initial setting

Settings

Control module

Leaving Home Lights

The leaving home light system can be switched between operable and inoperable.

On or Off^*1

On / Off

BCM

Reset

Returns the setting content of the lighting system to the initial setting.

No

No / Yes

•  BCM

•  FSC

•  Instrument cluster

•  Adaptive front lighting system (AFS) control module

Display of center display	Function	Initial setting	Settings	Control module
Leaving Home Lights	The leaving home light system can be switched between operable and inoperable.	On or Off^*1	On / Off	BCM
Reset	Returns the setting content of the lighting system to the initial setting.	No	No / Yes	• BCM • FSC • Instrument cluster • Adaptive front lighting system (AFS) control module

*1 :The initial value differs depending on the market.

Auto Wiper System

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Vehicle] on the center display.

4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Rain Sensing Wiper

The auto wiper function can be disabled.

On

On / Off^*1

BCM

Display of center display	Function	Initial setting	Settings	Control module
Rain Sensing Wiper	The auto wiper function can be disabled.	On	On / Off^*1	BCM

*1 :If the function is set to “Off”, the wipers will operate intermittently with the wiper switch in AUTO position.

Blind Spot Monitoring (BSM) System

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Blind Spot Monitor Volume

The volume of the blind spot monitoring (BSM) warning alarm can be changed.

High

High / Low / Off

Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Blind Spot Monitor Volume	The volume of the blind spot monitoring (BSM) warning alarm can be changed.	High	High / Low / Off	Instrument cluster

Lane Departure Warning System (LDWS)

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Safety] on the center display.

4. Select [Lane Departure Warning System] on the center display.

5. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Timing

The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed.

Adaptive

Adaptive / Early / Medium / Late

FSC

Warning

The warning operation sensitivity of the lane departure warning system (LDWS) can be changed.

Medium/

Often/Medium/Rare

FSC

Sound

The type of the LDWS warning alarm can be changed.

Rumble.

Beep / Rumble.

Instrument cluster

Beep Volume

The volume of the LDWS warning alarm (Beep) can be changed.

Low

High / Low

Instrument cluster

Rumble Strip Volume

The volume of the LDWS warning alarm (Rumble) can be changed.

Low

High / Mid / Low

Instrument cluster

Reset

Returns the setting content of the lane departure warning system to the initial setting.

No

No / Yes

• FSC

• Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Timing	The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed.	Adaptive	Adaptive / Early / Medium / Late	FSC
Warning	The warning operation sensitivity of the lane departure warning system (LDWS) can be changed.	Medium/	Often/Medium/Rare	FSC
Sound	The type of the LDWS warning alarm can be changed.	Rumble.	Beep / Rumble.	Instrument cluster
Beep Volume	The volume of the LDWS warning alarm (Beep) can be changed.	Low	High / Low	Instrument cluster
Rumble Strip Volume	The volume of the LDWS warning alarm (Rumble) can be changed.	Low	High / Mid / Low	Instrument cluster
Reset	Returns the setting content of the lane departure warning system to the initial setting.	No	No / Yes	• FSC • Instrument cluster

Turn Light System

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [Vehicle] on the center display.

4. Select [Turn] on the center display.

5. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

3-Flash Turn Signal

The turn light system can be switched between operable and inoperable.

On

On / Off

BCM

Turn Signal Volume

The volume of the turn and hazard indicator alarm can be changed.

Low

High / Low

Instrument cluster

Reset

Returns the setting content of the turn light system to the initial setting.

No

No / Yes

• BCM

• Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
3-Flash Turn Signal	The turn light system can be switched between operable and inoperable.	On	On / Off	BCM
Turn Signal Volume	The volume of the turn and hazard indicator alarm can be changed.	Low	High / Low	Instrument cluster
Reset	Returns the setting content of the turn light system to the initial setting.	No	No / Yes	• BCM • Instrument cluster

Language

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [System] on the center display.

4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Language

The display language can be changed.

English or UK English or Traditional Chinese^*1

Depends on market^*2

Connectivity master unit (CMU)

Display of center display	Function	Initial setting	Settings	Control module
Language	The display language can be changed.	English or UK English or Traditional Chinese^*1	Depends on market^*2	Connectivity master unit (CMU)

*1 :The initial value differs depending on the market.

*2 :Available only in display from the center display.

Distance

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [System] on the center display.

4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Distance

The distance unit can be changed.

Miles or km^*1

Miles / km

Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Distance	The distance unit can be changed.	Miles or km^*1	Miles / km	Instrument cluster

*1 :The initial value differs depending on the market.

Temperature

1. Switch the ignition ON (engine off or on).

2. Select [Settings] on the center display.

3. Select [System] on the center display.

4. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Temp^*1

The temperature unit can be changed.

°F or °C^*2

°F /°C

Instrument cluster

Display of center display	Function	Initial setting	Settings	Control module
Temp^*1	The temperature unit can be changed.	°F or °C^*2	°F /°C	Instrument cluster

*1 :When the ambient temperature display is switched, the set A/C cabin temperature display is also changed.

*2 :The initial value differs depending on the market.

Fuel economy monitor

1. Switch the ignition ON (engine off or on).

2. Select [Application] on the center display.

3. Select [Fuel economy monitor] on the center display.

4. Press the setting button on the menu screen.

5. Select an item name, and then select option.

Display of center display

Function

Initial setting

Settings

Control module

Show Screen at Ignition Off

The ending screen of the fuel monitor can be switched between display/non-display.

Off

On / Off

Connectivity master unit (CMU)

Sync Average and Trip A

The function which synchronizes the reset of the fuel reset and trip meters can be switched between on/off.

Off

On / Off

Connectivity master unit (CMU)

Display of center display	Function	Initial setting	Settings	Control module
Show Screen at Ignition Off	The ending screen of the fuel monitor can be switched between display/non-display.	Off	On / Off	Connectivity master unit (CMU)
Sync Average and Trip A	The function which synchronizes the reset of the fuel reset and trip meters can be switched between on/off.	Off	On / Off	Connectivity master unit (CMU)