ON-BOARD DIAGNOSTIC SYSTEM ACTIVE COMMAND MODES FUNCTION [PCM (SKYACTIV-G 1.5, SKYACTIV-G 2.0)]

id0102i6105400

Note

• Simulation items on parts which are not equipped to the vehicle do not operate.

• When the engine conditions and the other conditions have been met, the simulation item can be operated.

• The simulation items are shown below.

Simulation item table

Item	Applicable component	Operation	Operation condition
Item	Applicable component	Operation	Engine condition	Other condition
ACCS	A/C relay	Select OFF/ON to forcibly drive/stop the A/C relay.	• Under the following conditions: ― Ignition is switched ON (engine off)	Not applicable
ARPMDES	Target engine speed	Changes value (RPM) to forcibly vary engine speed.	• Under the following conditions: ― Idle ― Racing (not idle)	• The use in the following ranges is recommended: ― Engine coolant temperature: 75—95 °C {167—203 °F} ― Vehicle speed: 0 km/h {0 mph} ― Override drive parameter input range: 550—2,000 rpm
EVAPCP	Purge solenoid valve	Changes % and forcibly drives/stops purge solenoid valve.	• Under the following conditions: ― Ignition is switched ON (engine off) ― Idle ― Racing (not idle)	Not applicable
FAN_DUTY	Fan control module	Changes % and forcibly drives/stops fan control module.	• Under the following conditions: ― Ignition is switched ON (engine off) ― Idle ― Racing (not idle)	Not applicable
FAN1	Cooling fan relay	Select OFF/ON to forcibly drive/stop the cooling fan relay.	• Under the following conditions: ― Ignition is switched ON (engine off) ― Idle ― Racing (not idle)	Not applicable
FP	Fuel pump	Select OFF/ON to forcibly drive/stop the fuel pump.	• Under the following conditions: ― Ignition is switched ON (engine off) ― Idle ― Racing (not idle)	Not applicable
INJ_1	Fuel injector No.1	Select OFF to forcibly stop the fuel injector No.1.	• Under the following conditions: ― Ignition is switched ON (engine off) ― Idle ― Racing (not idle)	Warning • Do not use the simulation function while the vehicle is being driven. Stopping the fuel ejection causes the engine to stall which may cause the brakes to not function.
INJ_2	Fuel injector No.2	Select OFF to forcibly stop the fuel injector No.2.	• Under the following conditions: ― Ignition is switched ON (engine off) ― Idle ― Racing (not idle)
INJ_3	Fuel injector No.3	Select OFF to forcibly stop the fuel injector No.3.	• Under the following conditions: ― Ignition is switched ON (engine off) ― Idle ― Racing (not idle)
INJ_4	Fuel injector No.4	Select OFF to forcibly stop the fuel injector No.4.	• Under the following conditions: ― Ignition is switched ON (engine off) ― Idle ― Racing (not idle)
OIL_P_SOL	Engine oil solenoid valve	Select OFF/ON to forcibly drive/stop the engine oil solenoid valve.	• Under the following conditions: ― Ignition is switched ON (engine off) ― Idle ― Racing (not idle)	Caution • Reducing hydraulic pressure in the engine high speed range causes engine damage. In addition, DTCs related to variable valve timing may be detected.