STARTER INTERLOCK SWITCH INSPECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0]

id0119j1104200

Caution

•  Do not reuse the starter interlock switch if it is removed from the vehicle even once. Replace with a new starter interlock switch when installing.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2.  Disconnect the starter interlock switch connector.

3.  Verify that the continuity is as indicated in the table using a ohmmeter.

am2zzw00012323

am2zzw00012324

•  If the continuity is not as indicated in the table, replace the starter interlock switch.

(See STARTER INTERLOCK SWITCH REMOVAL/INSTALLATION.)