i-stop WARNING LIGHT (AMBER) [SKYACTIV-G 1.5, SKYACTIV-G 2.0]

id0140g8008700

Purpose, Function

• If the i-stop control inhibits the operation, the i-stop warning light (amber) flashes/illuminates to inform the driver that the i-stop control inhibits the operation.

Construction

• The i-stop warning light (amber) is built into the instrument cluster.

amxzzn00001159

• For vehicles with center display, a warning message in the center display is displayed when the i-stop warning light (amber) is illuminated or flashes. For the message content and verification method, refer to the “CENTER DISPLAY”. (See CENTER DISPLAY [WITH CENTER DISPLAY].)

Operation

• The flashing/illumination conditions of the i-stop warning light (amber) are as follows:

i-stop warning light (amber) flashing condition

― Any of the following DTCs are stored:

PCM DTC

• P0555:00, P057F:00, P058A:00, P0615:00, P0A0F:00, P0A8D:00, P0A8F:00, P0A94:00, P176E:00, P2502:00, P2503:00, P2504:00, U0101:00, U0121:00, U0131:00, U0140:00, U0151:00, U0155:00, U0214:00, U0298:00, U1007:00

• For details on DTCs, refer to “ON-BOARD DIAGNOSTIC SYSTEM TEST MODE”. (See ON-BOARD DIAGNOSTIC SYSTEM TEST MODE [PCM (SKYACTIV-G 1.5, SKYACTIV-G 2.0)].)

TCM DTC

• P0707:00, P0708:00, P0712:00, P0713:00, P0717:00, P0722:00, P0751:00, P0756:00, P0757:00, P0761:00, P0762:00, P0766:00, P0781:00, P0813:00, P0961:00, P0962:00, P0963:00, P0969:00, P0970:00, P0971:00, P0973:00, P0974:00, P0976:00, P0977:00, P0979:00, P0980:00, P0982:00, P0983:00, P0985:00, P0986:00, P0C1D:00, P0C29:00, P0C2A:00, P0C2B:00, P0C2C:00, P0C2D:00, P0C2E:00, P2719:00, P2720:00, P2721:00, P2757:00, P2758:00, P2762:00, P2763:00, P2764:00, P2797:00, U0073:00, U0074:00, U0100:00, U0115:00, U0121:00, U0442:00

• For details on DTCs, refer to “ON-BOARD DIAGNOSTIC SYSTEM MALFUNCTION DETECTION FUNCTION”. (See ON-BOARD DIAGNOSTIC SYSTEM MALFUNCTION DETECTION FUNCTION [TCM (SJ6A-EL)].)

DSC HU/CM DTC

• C0019:01, C0019:49, C001C:01, C001C:49, C001D:01, C001D:49, C0020:01, C0020:13, C0020:16, C0020:49, C0020:71, C0020:98, C0031:01, C0031:11, C0031:12, C0031:14, C0031:28, C0031:64, C0034:01, C0034:11, C0034:12, C0034:14, C0034:28, C0034:64, C0037:01, C0037:11, C0037:12, C0037:14, C0037:28, C0037:64, C003A:01, C003A:11, C003A:12, C003A:14, C003A:28, C003A:64, C0040:64, C0044:01, C0044:28, C0044:49, C0044:54, C0062:28, C0062:54, C0062:64, C006B:68, C0082:68, C101F:98, C1A77:11, C1A77:12, C1A77:49, C1A90:12, C1A90:16, C1A95:64, U0100:00, U0101:00, U0151:00, U0155:00, U0401:00, U0402:00, U0423:82, U0452:00, U0452:82, U2300:54, U2300:55, U2300:56, U2300:64, U3000:42, U3000:44, U3000:46, U3000:47, U3000:49, U3000:4A, U3003:16, U3003:17, U3003:1E

• For details on DTCs, refer to “ON-BOARD DIAGNOSTIC SYSTEM”. (See ON-BOARD DIAGNOSTIC SYSTEM [DSC HU/CM].)

EPS control module DTC

• C200D:1C, C200D:64, U0001:88, U0100:00, U2011:19, U2011:1C, U2011:61, U2011:62, U2011:64, U2011:72, U2011:92, U3000:16, U3000:1C, U3000:28, U3000:41, U3000:47, U3000:49, U3000:61, U3000:64, U3000:73, U3000:96

• For details on DTCs, refer to “ON-BOARD DIAGNOSTIC SYSTEM”. (See ON-BOARD DIAGNOSTIC SYSTEM [EPS CONTROL MODULE].)

DC-DC CONVERTER (i-ELOOP) DTC (with i-ELOOP)

• P0A12:00, P1794:00, U3000:49

• For details on DTCs, refer to the “ON-BOARD DIAGNOSTIC SYSTEM [i-ELOOP]” in the workshop manual.

i-stop warning light (amber) illumination condition

― Any one of the following conditions is met:

• Ignition switched ON (check of i-stop control system)

• i-stop OFF switch is on

• Engine stalls due to driver's operation while engine is stopped by i-stop control

• Communication error to PCM and instrument cluster

• The PCM sends an i-stop warning light (amber) flashing/illumination request to the instrument cluster via CAN communication.