ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR FUNCTION [TCM (SJ6A-EL)]


id0502o1280600


Purpose/Function

•  The PID/DATA monitor function can monitor control data such as input signals/internal calculation values/output signals using the M-MDS.
•  The module control condition can be verified in real-time by the PID/DATA monitor function.

Construction/Operation

PID/DATA monitor item table

—: Not applicable

Item

Unit/Condition

Definition

APP
%
Accelerator pedal
BRAKE_SW
Off/On
Brake pedal
ECT
°C {°F}
Engine coolant temperature
ENG_TQ
Engine torque
EOP
Off/On
Electric AT oil pump
GEAR_SEL
P/R/N/1/2/3/4/5/6
Gear position
IS_ATF_H
Off/On
While i-stop is prohibited (ATF temperature is high)
IS_BV_H
Off/On
While i-stop is prohibited (ATF temperature is high)
IS_BV_L
Off/On
While i-stop is prohibited (ATF temperature is low)
IS_EOP_L
Off/On
While i-stop is prohibited (electric AT oil pump drive voltage is insufficient)
I-Stop_EST
Off/On
i-stop is permitted by TCM
LONGI_ACCEL
Longitudinal acceleration speed
M_DOWN
Off/On
Down switch
M_UP
Off/On
Up switch
OSS
RPM
Speed sensor
PADDLE_DOWN
Off/On
Steering shift switch (down switch)
PADDLE_UP
Off/On
Steering shift switch (up switch)
RPM
RPM
Engine speed
SLT
A
Pressure control solenoid
SS_ON-OFF1
Off/On
Shift solenoid A
SS_ON-OFF2
Off/On
Shift solenoid B
SS_ON-OFF3
Off/On
Shift solenoid C
SS_ON-OFF4
Off/On
Shift solenoid D
SS_ON-OFF5
Off/On
Shift solenoid E
SSA_CC
A
Shift solenoid F
SSB_CC
A
Shift solenoid G
SSLU_C
A
TCC control solenoid
TFT
°C {°F}
ATF temperature
TFTV
V
ATF temperature sensor
THOP
%
Throttle opening angle
TR
P/R/N/D/M
Selector lever position
TSS
RPM
Turbine sensor
VPWR
V
Module supply voltage
VSS
KPH {MPH}
Vehicle speed