NO.26 STARTER DOES NOT WORK [SJ6A-EL]

id050307803100

26

Starter does not work

DESCRIPTION

•  Starter does not work even when P or N position is selected.

POSSIBLE CAUSE

•  Selector lever malfunction

•  Manual shaft malfunction

•  TR switch malfunction

•  TR switch mis-adjustment

•  Transmission operates in fail-safe function (Starter lock system related circuit open or short)

•  Immobilizer system operating or system malfunction.

Diagnostic procedure

STEP	INSPECTION		ACTION
1	• Inspect the selector lever, TR switch and manual shaft positions. • Are these position normal?	Yes	Go to the next step.
1		No	Adjust or replace the suspect part position.
2	• Inspect the TR switch. (See TRANSMISSION RANGE (TR) SWITCH INSPECTION [SJ6A-EL].) • Is the TR switch normal?	Yes	Perform the symptom troubleshooting “NO.3 WILL NOT CRANK”. (See NO.3 WILL NOT CRANK [SKYACTIV-G 1.5, SKYACTIV-G 2.0].)
2		No	Replace the TR switch. (See TRANSMISSION RANGE (TR) SWITCH REMOVAL/INSTALLATION [SJ6A-EL].)
3	• Verify test results. ― If normal, return to the diagnostic index to service any additional symptoms. ― If malfunction remains, inspect the related Service Information and perform repair or diagnosis. • If the vehicle is repaired, troubleshooting completed. • If the vehicle is not repaired or additional diagnostic information is not available, replace the TCM. (See TCM REMOVAL/INSTALLATION [SJ6A-EL].)

26	Starter does not work
DESCRIPTION	• Starter does not work even when P or N position is selected.
POSSIBLE CAUSE	• Selector lever malfunction • Manual shaft malfunction • TR switch malfunction • TR switch mis-adjustment • Transmission operates in fail-safe function (Starter lock system related circuit open or short) • Immobilizer system operating or system malfunction.