CLUTCH DISC INSPECTION

id051000157500

1. Inspect the lining surface for discoloration and grease adhesion.

2. Inspect the torsion springs for weakness and the rivets for looseness.

3. Using a vernier caliper, measure the depth between the lining surface and the rivet head.

amxuuw00005181

Minimum clutch disc thickness

0.3 mm {0.01 in}

• If it is less than the minimum, replace the clutch disc. (See CLUTCH UNIT REMOVAL/INSTALLATION.)

4. Measure the clutch disc runout using a dial gauge.

am3uuw00002096

Maximum clutch disc runout

0.7 mm {0.03 in}

• If it exceeds the maximum, replace the clutch disc. (See CLUTCH UNIT REMOVAL/INSTALLATION.)