DTC C200D:1C/C200D:64 [EPS CONTROL MODULE]

id060230835100

DTC

C200D:1C

Resolver sensor

C200D:64

DETECTION CONDITION

•  Resolver sensor malfunction is detected

FAIL-SAFE FUNCTION

•  Refer to “Fail-safe function table”. (See DTC TABLE [EPS CONTROL MODULE].)

POSSIBLE CAUSE

•  Resolver sensor malfunction

SYSTEM WIRING DIAGRAM

—

Diagnostic Procedure

Step

Inspection

Action

1

VERIFY DTC TROUBLESHOOTING COMPLETED

•  Using the M-MDS, clear the DTC from the EPS control module.
(See CLEARING DTC [EPS CONTROL MODULE].)

•  Using the M-MDS, perform the EPS control module DTC inspection.
(See DTC INSPECTION [EPS CONTROL MODULE].)

•  Is the same DTC present?

Yes

Repeat the inspection from Step1.

If the malfunction recurs, replace the EPS control module, then go to the next step.

(See ELECTRIC POWER STEERING (EPS) CONTROL MODULE REMOVAL/INSTALLATION.)

No

Go to the next step.

2

VERIFY NO DTC IS PRESENT

•  Are any DTCs present?

Yes

Go to the applicable DTC inspection.

(See DTC TABLE [EPS CONTROL MODULE].)

No

DTC troubleshooting completed.

DTC	C200D:1C	Resolver sensor
	C200D:64
DETECTION CONDITION		• Resolver sensor malfunction is detected
FAIL-SAFE FUNCTION		• Refer to “Fail-safe function table”. (See DTC TABLE [EPS CONTROL MODULE].)
POSSIBLE CAUSE		• Resolver sensor malfunction
SYSTEM WIRING DIAGRAM		—

Step	Inspection		Action
1	VERIFY DTC TROUBLESHOOTING COMPLETED • Using the M-MDS, clear the DTC from the EPS control module. (See CLEARING DTC [EPS CONTROL MODULE].) • Using the M-MDS, perform the EPS control module DTC inspection. (See DTC INSPECTION [EPS CONTROL MODULE].) • Is the same DTC present?	Yes	Repeat the inspection from Step1. If the malfunction recurs, replace the EPS control module, then go to the next step. (See ELECTRIC POWER STEERING (EPS) CONTROL MODULE REMOVAL/INSTALLATION.)
1		No	Go to the next step.
2	VERIFY NO DTC IS PRESENT • Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [EPS CONTROL MODULE].)
2	VERIFY NO DTC IS PRESENT • Are any DTCs present?	No	DTC troubleshooting completed.