DTC U2011:19/U2011:1C/U2011:61/U2011:62/U2011:64/U2011:72/U2011:92 [EPS CONTROL MODULE]

id060230835200

DTC	U2011:19	EPS motor
	U2011:1C
	U2011:61
	U2011:62
	U2011:64
	U2011:72
	U2011:92
DETECTION CONDITION		•  EPS motor malfunction is detected
FAIL-SAFE FUNCTION		•  Refer to “Fail-safe function table”. (See DTC TABLE [EPS CONTROL MODULE].)
POSSIBLE CAUSE		•  EPS motor malfunction
SYSTEM WIRING DIAGRAM		—

Diagnostic Procedure

Step	Inspection		Action
1	VERIFY DTC TROUBLESHOOTING COMPLETED •  Using the M-MDS, clear the DTC from the EPS control module. (See CLEARING DTC [EPS CONTROL MODULE].) •  Using the M-MDS, perform the EPS control module DTC inspection. (See DTC INSPECTION [EPS CONTROL MODULE].) •  Is the same DTC present?	Yes	Replace the EPS control module, then go to the next step. (See ELECTRIC POWER STEERING (EPS) CONTROL MODULE REMOVAL/INSTALLATION.)
		No	Go to the next step.
2	VERIFY NO DTC IS PRESENT •  Are any DTCs present?	Yes	Go to the applicable DTC inspection. (See DTC TABLE [EPS CONTROL MODULE].)
		No	DTC troubleshooting completed.