DTC U0401:86 [RETRACTABLE HARDTOP CONTROL MODULE]

id0902r4078300

Description

Error signal received from PCM
Detection condition
•  The retractable hardtop control module receives an error signal from the PCM with the ignition switched ON (engine off or on).
Fail-safe
•  Stops retractable hardtop operation
Possible cause
•  PCM stores DTCs
•  PCM malfunction
•  Retractable hardtop control module malfunction
System wiring diagram
Not applicable

Diagnostic Procedure

Step

Inspection

Action
1
VERIFY PCM DTCs
•  Retrieve the PCM DTCs using the M-MDS.
•  Are any DTCs displayed?
Yes
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [PCM (SKYACTIV-G 1.5, SKYACTIV-G 2.0)].)
No
Go to the next step.
2
VERIFY IF MALFUNCTIONING LOCATION IS PCM DEPENDING ON REPEATABILITY
•  Clear the DTC for the retractable hardtop control module using the M-MDS.
•  Retrieve the retractable hardtop control module DTCs using the M-MDS.
•  Is the same DTC displayed?
Yes
Replace the PCM, then go to the next step.
(See PCM REMOVAL/INSTALLATION [SKYACTIV-G 1.5, SKYACTIV-G 2.0].)
No
Go to Step 4.
3
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
•  Clear the DTC for the retractable hardtop control module using the M-MDS.
•  Retrieve the retractable hardtop control module DTCs using the M-MDS.
•  Is the same DTC displayed?
Yes
Repeat the inspection from Step 1.
•  If the malfunction recurs, replace the retractable hardtop control module.
Go to the next step.
No
Go to the next step.
4
VERIFY IF OTHER DTCs DISPLAYED
•  Are any other DTCs displayed?
Yes
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [RETRACTABLE HARDTOP CONTROL MODULE].)
No
DTC troubleshooting completed.