BACK-UP LIGHT SWITCH INSPECTION

id091800800300

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2.  Lift up the vehicle.

3.  Remove the bolts.

amxuuw00004667

4.  Remove the member bracket.

5.  Disconnect the connector.

amxuuw00004668

6.  Verify that the continuity between the back-up light switch terminals is as indicated in the table.

amxuuw00003285

ardjjw00004649

•  If not as indicated in the table, replace the back-up light switch. (See BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [M66M-D].)