AUTO LEVELING SENSOR SHORT-CORD REMOVAL/INSTALLATION

id091800905000

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2.  While pressing the clip A tabs in the direction of arrows (1) shown in the figure, press the clip A in the direction of arrow (2) to detach the clip A tabs from the auto leveling sensor.

amxzzw00003218

3.  While pressing the clip B tabs in the direction of arrows (1) shown in the figure, press the clip B in the direction of arrow (2) to detach the clip B tabs from the auto leveling sensor.

4.  Disconnect the connectors.

5.  Remove the auto leveling sensor short-cord.

6.  Install in the reverse order of removal.