WASHER FLUID-LEVEL SENSOR INSPECTION

id091900801900

1.  Turn the steering wheel to full right lock.

2.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

3.  Lift up the vehicle.

4.  Remove the front mudguard No.2. (See FRONT MUDGUARD REMOVAL/INSTALLATION.)

5.  Disconnect the connector.

amxuuw00004688

6.  Verify that the continuity between the washer fluid-level sensor terminals is as indicated in the table.

amxuuw00004689

amxuuw00004690

•  If not as indicated in the table, replace the washer fluid-level sensor. (See WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION.)