AudioPilot^® MICROPHONE REMOVAL/INSTALLATION

id092000866400

Note

•  AudioPilot^® is a registered trademark of Bose^® Corporation.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2.  Remove the following parts:

(1)  Scuff plate (passenger's side) (See SCUFF PLATE REMOVAL/INSTALLATION.)

(2)  Front side trim (passenger's side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(3)  A-pillar trim (passenger's side) (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(4)  Passenger-side lower panel (See PASSENGER-SIDE LOWER PANEL REMOVAL/INSTALLATION.)

3.  Disconnect the connector.

amxzzw00004613

4.  Remove the screw.

5.  Remove the AudioPilot^® microphone.

6.  Install in the reverse order of removal.