SHROUD UPPER PANEL INSTALLATION [PANEL REPLACEMENT]

id098008800500

Symbol Marks

amxuub00000170

Installation Procedure

1.  When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

2.  Drill holes for the plug welding before installing the new parts.

3.  After temporarily installing new parts, make sure the related parts fit properly.

4.  Plug weld the 27 locations indicated by (A) shown in the figure, then install the shroud upper panel.

Note

•  When replacing the shroud side stay separately, plug weld the 2 locations indicated by (B).

amxzzb00000074