 |
belbze00000176
TIMING CHAIN DISASSEMBLY
id011000505500
1. Disassemble in the order indicated in the table.
belbze00000176
|
|
1
|
Dipstick (If equipped)
|
|
2
|
Spark plug
|
|
3
|
Cylinder head cover
|
|
4
|
Crankshaft pulley lock bolt
|
|
5
|
Crankshaft pulley
|
|
6
|
Water pump pulley
|
|
7
|
Drive belt idler pulley (If equipped)
|
|
8
|
Engine front cover
|
|
9
|
Front oil seal
|
|
10
|
Chain tensioner
|
|
11
|
Tensioner arm
|
|
12
|
Chain guide
|
|
13
|
Timing chain
|
|
14
|
Seal (If equipped)
|
|
15
|
Oil pump chain tensioner
|
|
16
|
Oil pump chain guide (If equipped)
|
|
17
|
Oil pump sprocket
|
|
18
|
Oil pump chain
|
|
19
|
Crankshaft sprocket
|
Crankshaft Pulley Lock Bolt Disassembly Note
1. Install the SST to the ring gear to lock the crankshaft against rotation.
belbze00000034
|
Front Oil Seal Disassembly Note
1. Remove the oil seal using a flat head screwdriver.
belbze00000035
|
Chain Tensioner Disassembly Note
1. Hold the chain tensioner ratchet lock mechanism away from the ratchet stem with a thin screwdriver.
2. Slowly press the tensioner piston.
3. Hold the chain tensioner piston with a 1.5 mm {0.06 in}wire or paper clip.
belbze00000036
|
Oil Pump Sprocket Disassembly Note
1. Temporarily install the crankshaft pulley and crankshaft pulley lock bolt to the crankshaft, and lock the oil pump against rotation as shown in figure.
belbze00000037
|
2. Remove the oil pump sprocket, and then remove the crankshaft pulley and crankshaft pulley lock bolt.
