•  Arrangement of the workshop is important for safe and efficient work.

•  Protective head covering and safety shoes should always be worn. Depending upon the nature of the work, gloves, safety glasses, ear protectors, face shield, etc., should also be used.

mzz2036b001

•  Use seat covers and floor covers.

•  Use heat‐resistant protective covers to protect glass areas and seats from heat or sparks during welding.

•  Protect items such as moldings, garnishes, and ornaments with tape when welding.

mzz2036b002

•  Remove the fuel tank before using an open flame in that area. Plug connection piping to prevent fuel leakage.

mzz2036b003

•  When using pulling equipment, keep away from the pulling area and use safety wires to prevent accidents.

mzz2036b004

•  Turn the ignition switch to the LOCK position.

•  Disconnect the battery cables.

mzz2036b005

Note

•  When connecting the negative battery cable to the battery, connect the negative battery cable and the ground cable as shown in the figure.

e5u117zw5004

•  Securely connect the welding machine ground near the welding area.

mzz2036b006