NO.2 MIL ILLUMINATES [L8, LF]

id0103a0800800

2

MIL ILLUMINATES

DESCRIPTION

•  MIL is illuminated incorrectly.

POSSIBLE CAUSE

•  The MIL illuminates for emission-related concern (DTC is stored in PCM).

•  Instrument cluster malfunction

•  PCM malfunction

Note

•  If the MIL blinks at steady rate, misfire condition could possibly exist.

2	MIL ILLUMINATES
DESCRIPTION	• MIL is illuminated incorrectly.
POSSIBLE CAUSE	• The MIL illuminates for emission-related concern (DTC is stored in PCM). • Instrument cluster malfunction • PCM malfunction Note • If the MIL blinks at steady rate, misfire condition could possibly exist.

Diagnostic procedure

STEP	INSPECTION	RESULTS	ACTION
1	Connect the M-MDS to the DLC-2. Perform the DTC Reading Procedure. (See ON-BOARD DIAGNOSTIC TEST [L8, LF].) Are any DTCs present?	Yes	Go to the appropriate DTC inspection. (See DTC TABLE [L8, LF].)
1		No	Inspect the instrument cluster operation. (See INSTRUMENT CLUSTER INSPECTION.) Repair or replace the malfunctioning part according to the inspection results.
2	Verify test results. • If normal, return to diagnostic index to service any additional symptoms. (See ENGINE SYMPTOM TROUBLESHOOTING [L8, LF].) • If malfunction remains, inspect related Service information perform repair or diagnosis. ― If vehicle repaired, troubleshooting completed. ― If vehicle not repaired or additional diagnostic information not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [L8, LF].)