ENGINE SST [L8, LF]

id0160a3119200

Example

1:49 UN20 5072 2:205–072   Holder

1:49 JE01 061 2:303–507   Crankshaft TDC setting peg (Except LF MT)		1:49 N010 101 2: —   Crankshaft TDC setting peg (LF MT)		1:49 UN20 507202 2: 205–072–02   Crankshaft holding tool pins
1:49 D032 316 2: —   Protractor		1:49 JE01 054 2: —   Camshaft alignment timing Tool (Europe)		1:49 UN30 3376 2: 303–376   Camshaft Alignment Timing Tool (Except Europe)
1:49 G028 205 2:—   Oil seal installer		1:49 0187 280A 2: —   Oil pressure gauge		1:49 E019 001 2: —   Adapter
1:49 N013 001 2:—   Wrench		1:49 E017 5A0 2: —   Engine support		1:49 N013 1A0D 2:—   Fuel pressure gauge set
1:49 N013 103A 2:—   Remover (Part of 49 N013 1A0D)		1:49 L018 001 2: —   O2 sensor wrench		1:49 UN30 3328 2: 303–328   Rear oil seal replacer
1:49 G040 002 2:–   Installer		1:49 D019 908 2:–   Gauge (Part of 49 D019 9A2)		1:49 D019 909 2:–   Hose (Part of 49 D019 9A2)
1:49 D019 910 2:–   Adapter (Part of 49 D019 9A2)		1:49 D019 911 2:–   Adapter (Part of 49 D019 9A2)		1:49 D019 914 2:–   Adapter (Part of 49 D019 9A2)
1:49 9200 146 2:–   Adapter hose (Part of 49 9200 145)		1:49 9200 147 2:–   Adapter (Part of 49 9200 145)		1:49 UN20 5072 2:205–072   Holder
1:49 E042 001 2:—   Remover		—		—