SUSPENSION TECHNICAL DATA


id025000800100


Front Wheel Alignment (Unloaded)

16-inch wheel

Item

Specification

Total toe-in
Tire [Tolerance ±4 mm {0.15 in}]
(mm {in})
1.6 {0.063}
Rim inner
(mm {in})
1.1±2.6 {0.04±0.10}
 
degree
0°09′±22′
Steering angle [Tolerance ±3°]
Inner
38°42′
Outer
32°54′
Steering axis inclination (Reference value)
10°57′
Camber
[Tolerance ±1°]
Vehicle height: From the end of the front fender to the center of the wheel (mm {in})
356—365 {14.1—14.3}
-0°34′
366—375 {14.5—14.7}
-0°19′
376—385 {14.8—15.1}
-0°07′
386—395 {15.2—15.5}
0°04′
396—405 {15.6—15.9}
0°12′
Caster
[Tolerance ±1°]
Vehicle height: From the end of the rear fender to the center of the wheel (mm {in})
354—363 {14.0—14.2}
6°24′
364—373 {14.4—14.6}
6°10′
374—383 {14.8—15.0}
5°56′
384—393 {15.2—15.4}
5°43′
394—403 {15.6—15.8}
5°29′

17-inch wheel

Item

Specification

Total toe-in
Tire [Tolerance ±4 mm {0.15 in}]
(mm {in})
1.6 {0.063}
Rim inner
(mm {in})
1.1±2.8 {0.04±0.11}
 
degree
0°09′±22′
Steering angle [Tolerance ±3°]
Inner
38°42′
Outer
32°54′
Steering axis inclination (Reference value)
11°04′
Camber
[Tolerance ±1°]
Vehicle height: From the end of the front fender to the center of the wheel (mm {in})
351—360 {13.8—14.1}
-0°42′
361—370 {14.3—14.5}
-0°26′
371—380 {14.7—14.9}
-0°13′
381—390 {15.0—15.3}
-0°01′
391—400 {15.4—15.7}
0°08′
Caster
[Tolerance ±1°]
Vehicle height: From the end of the rear fender to the center of the wheel (mm {in})
349—358 {13.8—14.0}
6°32′
359—368 {14.2—14.4}
6°18′
369—378 {14.6—14.8}
6°04′
379—388 {15.0—15.2}
5°50′
389—398 {15.4—15.6}
5°36′

Note
•  Unloaded vehicle: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
•  Difference between the left and right dimension for camber and caster is within.

Rear Wheel Alignment (Unloaded)

16-inch wheel

Item

Specification

Total toe-in
Tire [Tolerance ±4 mm {0.15 in}]
(mm {in})
3 {0.12}
Rim inner
(mm {in})
1.8±2.4 {0.071±0.094}
 
degree
0°17′±22′
Camber
[Tolerance ±1°]
Vehicle height: From the end of the rear fender to the center of the wheel (mm {in})
354—363 {14.0—14.2}
-1°33′
364—373 {14.4—14.6}
-1°18′
374—383 {14.8—15.0}
-1°04′
384—393 {15.2—15.4}
-0°54′
394—403 {15.6—15.8}
-0°45′

17-inch wheel

Item

Specification

Total toe-in
Tire [Tolerance ±4 mm {0.15 in}]
(mm {in})
3 {0.12}
Rim inner
(mm {in})
2.2±2.8 {0.083±0.110}
 
degree
0°17′±22′
Camber
[Tolerance ±1°]
Vehicle height: From the end of the rear fender to the center of the wheel (mm {in})
349—358 {13.8—14.0}
-1°42′
359—368 {14.2—14.4}
-1°25′
369—378 {14.6—14.8}
-1°11′
379—388 {15.0—15.2}
-0°59′
389—398 {15.4—15.6}
-0°49′

Note
•  Unloaded vehicle: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
•  Difference between the left and right camber angle is within .

Wheel and Tire

Item

Specification

Standard tire and wheel
Wheel
Size
16 × 6 1/2JJ
16 × 6 1/2J
17 × 7J
Offset
(mm {in})
50 {2.0}
55 {2.17}
Pitch circle diameter
(mm {in})
114.3 {4.50}
Material
Steel
Aluminum alloy
Tire
Size
205/50R16 87V
205/45R17 84W
Air pressure
(kPa {kgf/cm2, psi})
Front
200 {2.0, 29}
Rear
200 {2.0, 29}
Remaining tread
(mm {in})
1.6 {0.06}
Wheel and
tire
Wheel and tire runout
Radial direction
1.5 {0.06} max.
(mm {in})
Lateral direction
2.5 {0.10} max.
2.0 {0.08} max.
Wheel imbalance
(g {oz})
9 {0.3} max.
Adhesive-type*1: 14 {0.49} max.
Knock-type*2: 9 {0.3} max
Adhesive-type*1: 13 {0.46} max
Knock-type*2: 8 {0.28} max

*1  :Total weight exceeds 160 g {5.65 oz}.
*2  :One balance weight: 60 g {2.12 oz} max. If the total weight exceeds 100 g {3.53 oz} on one side, rebalance after moving the tire around on the rim. Do not use three or more balance weights.

Suspension

Item

Specification

Front upper arm ball joint rotational torque
0.3—2.2 N·m {4—22 kgf·cm, 3—19 in·lbf}
Front lower arm ball joint rotational torque
0.4—2.9 N·m {5—29 kgf·cm, 4—25 in·lbf}
Stabilizer control link ball joint rotational torque
0.14—1.04 N·m {1.5—10.6 kgf·cm, 1.3—9.2 in·lbf}
Rear trailing link (upper) ball joint rotational torque
0.4—3.3 N·m {5—33 kgf·cm, 4—29 in·lbf}
Rear lateral link (upper) ball joint rotational torque
0.4—2.8 N·m {5—28 kgf·cm, 4—24 in·lbf}
Rear lateral link (lower) ball joint rotational torque
0.4—2.8 N·m {5—28 kgf·cm, 4—24 in·lbf}
Toe control link ball joint rotational torque
0.3—2.2 N·m {4—22 kgf·cm, 3—19 in·lbf}
Pull scale reading: 3—22 N {0.3—2.2 kgf, 0.7—4.9 lbf}
Stabilizer control link ball joint rotational torque
0.23—0.47 N·m {2.35—4.79 kgf·cm, 2.04—4.15 in·lbf}