NO.3 THERE IS A MALFUNCTION IN THE SYSTEM EVEN THOUGH ABS WARNING LIGHT, BRAKE SYSTEM WARNING LIGHT, DSC INDICATOR LIGHT AND DSC OFF LIGHT DO NOT ILLUMINATE [DYNAMIC STABILITY CONTROL (DSC)]

id0403b2805500

3

There is a malfunction in the system even though ABS warning light, brake system warning light, DSC indicator light and DSC OFF light do not illuminate
POSSIBLE CAUSE
•  There is a mechanical malfunction in system
―  DSC HU/CM DTC is stored
―  DSC system malfunction
―  Conventional brake system malfunction

Diagnostic procedure

STEP

INSPECTION

ACTION
1
CONFIRM DSC HU/CM DTC
•  Perform the Reading DTCs Procedure.
•  Are any DTC present?
Yes
Go the applicable DTC inspection.
(See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)].)
No
Go to the next step.
2
INSPECT DSC SYSTEM
•  Perform “DSC SYSTEM INSPECTION”.
•  Is there any malfunction?
Yes
Repair or replace the malfunctioning part according to the inspection results.
No
Inspect the conventional brake system.
Repair or replace the malfunctioning part according to the inspection results, if necessary.