REAR ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION

id041300800500

1.  Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION.)

2.  Remove the partition board. (See PARTITION BOARD REMOVAL/INSTALLATION.)

3.  Remove the trunk side trim. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

4.  Remove the fuel-filler pipe protector. (See FUEL TANK REMOVAL/INSTALLATION [L8, LF].)

5.  Remove in the order indicated in the table.

6.  Install in the reverse order of removal.

amxzzw00000255

1	Connector
2	Bolt
3	Rear ABS wheel-speed sensor