TURBINE SENSOR REMOVAL/INSTALLATION [SJ6A-EL]

id051311252000

Caution

•  Water or foreign material entering the connector can cause poor connections or corrosion. Be sure that water or foreign material do not enter the connector when disconnecting it.

•  Do not damage the turbine sensor.

1.  Remove the battery cover.

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [L8, LF].)

3.  Disconnect the turbine sensor connector.

4.  Remove the turbine sensor.

e5u513zw5070

5.  Install the turbine sensor.

6.  Connect the turbine sensor connector.

7.  Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [L8, LF].)

8.  Install the battery cover.