DTC U2023 [INSTRUMENT CLUSTER]
id0902e8595600
|
DTC U2023 |
• Abnormal message from PCM
|
|---|---|
|
DETECTION CONDITION
|
• Correct data cannot be received from PCM
|
|
POSSIBLE CAUSE
|
• PCM malfunction
|
Diagnostic procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
INSPECT FOR PCM MALFUNCTION
• Turn the ignition switch to LOCK position.
• Using the M-MDS, perform the DTC inspection for the PCM.
• Are any DTCs detected?
|
Yes
|
Go to applicable DTC inspection.
(See DTC TABLE [L8, LF].)
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY THAT THE SAME DTC IS NOT PRESENT
• Clear the DTCs from the memory.
• Are the same DTCs present?
|
Yes
|
Repeat the inspection from Step 1.
If the malfunction recurs, replace the PCM, then go to the next step. (See PCM REMOVAL/INSTALLATION [L8, LF].)
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY THAT NO OTHER DTCS ARE PRESENT
• Are any other DTCs output?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||