FRONT BUMPER REINFORCEMENT REMOVAL/INSTALLATION

id091000800600

1.  Disconnect the negative battery cable. (SeeBATTERY REMOVAL/INSTALLATION [L8, LF].)

2.  Remove the following parts:

(1)  Front bumper (See FRONT BUMPER REMOVAL/INSTALLATION.)

(2)  Front combination light (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)

(3)  Fresh air duct (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L8, LF].)

(4)  Horn (See HORN REMOVAL/INSTALLATION.)

3.  Remove in the order indicated in the table.

amxzzw00001497

1	Clip
2	Shroud seal plate
3	Harness clip
4	Front bumper reinforcement

4.  Install in the reverse order of removal.