NO.2 MIL ILLUMINATES [ZJ, ZY]

id0103b0800800

2

MIL ILLUMINATES

DESCRIPTION

•  The MIL is illuminated incorrectly.

POSSIBLE CAUSE

•  The MIL illuminates for emission-related concern (DTC is stored in the PCM).

•  Instrument cluster malfunction

•  PCM malfunction

Note

•  If the MIL blinks at steady rate, misfire condition could exist.

2	MIL ILLUMINATES
DESCRIPTION	• The MIL is illuminated incorrectly.
POSSIBLE CAUSE	• The MIL illuminates for emission-related concern (DTC is stored in the PCM). • Instrument cluster malfunction • PCM malfunction Note • If the MIL blinks at steady rate, misfire condition could exist.

Diagnostic procedure

STEP	INSPECTION	ACTION
1	Perform the DTC Reading Procedure. (See ON-BOARD DIAGNOSTIC TEST [ZJ, ZY].) Are any DTCs present?	Yes	Go to the appropriate DTC inspection. (See DTC TABLE [ZJ, ZY].)
1		No	Inspect the instrument cluster. (See INSTRUMENT CLUSTER INSPECTION.) Replace the instrument cluster, if necessary. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
2	Verify test results. • If normal, return to the diagnostic index to service any additional symptoms. (See SYMPTOM DIAGNOSTIC INDEX [ZJ, ZY].) • If the malfunction remains, inspect the related Service Information and perform the repair or diagnosis. ― If the vehicle is repaired, troubleshooting is completed. ― If the vehicle is not repaired or additional diagnostic information is not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [ZJ, ZY].)