INTAKE SHUTTER VALVE INSPECTION [MZ-CD 1.4 DI Turbo]

id0116z1093500

Resistance Inspection

1. Remove the engine cover.

2. Disconnect the negative battery cable.

3. Dicconnect the intake shutter valve connector.

4. Measure the resistance between the intake shutter valve terminals C and D.

am2zzw00003104

• If not within the specification, replace the intake shutter valve. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZ-CD 1.4 DI Turbo].)

Intake shutter valve resistance

Approx. 6.6 ohms [20 °C {68 °F}]