DIESEL PARTICULATE FILTER DIFFERENTIAL PRESSURE SENSOR LEARNED RESET [MZ-CD 1.6 (Y6)]
id0140b2447000
-
Note
-
• Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the DIESEL PARTICULATE FILTER DIFFERENTIAL PRESSURE SENSOE LEARNED RESET
1. Connect the M-MDS to DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
When using the IDS (laptop PC)
-
1. Select the “Powertrain”.
3. Then, select items from the screen menu in the following order.
-
1. Select “Service Functions”.
2. Select “PCM”.
4. Select “Reset the Diesel Particulate Differential Pressure Sensor Learned Values” and perform procedures according to directions on the M-MDS screen.
5. Retrieve DTCs by the M-MDS, then verify that there is no DTC present.
-
