MASS AIR FLOW (MAF) SENSOR INSPECTION [MZ-CD 1.6 (Y6)]

id0140b2800700

Visual Inspection

1.  Remove the MAF/IAT sensor.

2.  Verify that there are no metal shavings on the sensor.

3.  Visually inspect the MAF sensor for the following:

•  Damage

•  Cracks

•  Rusted sensor terminal

•  Bent sensor terminal

―  If there is any malfunction, replace the malfunction part. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZ-CD 1.6 (Y6)].)

4.  Install the MAF/IAT sensor.