CRANKSHAFT POSITION (CKP) SENSOR INSPECTION [MZ-CD 1.4 DI Turbo]

id0140b8800500

Caution

•  Water penetrating the connector will cause sensor malfunction. To prevent this, be careful not to damage the wiring harnesses or the waterproof connector so as to cause water penetration.

Visual inspection

1.  Remove the CKP sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION [MZ-CD 1.4 DI Turbo].)

2.  Verify that there are no metal shavings on the sensor.

3.  Install the CKP sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION [MZ-CD 1.4 DI Turbo].)

Voltage inspection

1.  Idle the engine.

2.  Measure the output voltage using an oscilloscope.

am2zzw00002925

•  If it is not within the specification, replace the CKP sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION [MZ-CD 1.4 DI Turbo].)