CLUTCH PEDAL POSITION (CPP) SWITCH INSPECTION [MZ-CD 1.4 DI Turbo]

id0140b8801600

Visual Inspection

1.  Remove the CPP switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION [B65M-R].)

2.  Verify that there are no metal shavings on the sensor.

3.  Visually inspect the CPP switch for the following:

•  Damage

•  Cracks

•  Rusted switch terminal

•  Bent switch terminal

―  If there is any malfunction, replace the CPP switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION [B65M-R].)

4.  Install the CPP switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION [B65M-R].)

Continuity Inspection

1.  Remove the CPP switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION [B65M-R].)

2.  Verify that the continuity between CPP switch terminals A and B is as indicated in the table. (See CLUTCH PEDAL REMOVAL/INSTALLATION [B65M-R].)

am2zzw00002918

•  If it is not as indicated in the table, replace the CPP switch.

am3zzw00001562