ACCELERATOR PEDAL POSITION (APP) SENSOR INSPECTION [MZ-CD 1.4 DI Turbo]

id0140b8803200

1.  Connect the M-MDS to the DLC-2.

am2zzw00003094

2.  Switch the ignition to ON.

3.  Verify that the APP sensor output signal (PID: APP1, APP2) increases according to the increase in the accelerator opening angle when the accelerator opening angle is gradually increased.

•  If verified, go to the next step.

•  If not as verified, replace the accelerator pedal. (See ACCELERATOR PEDAL REMOVAL/INSTALLATION [MZ-CD 1.4 DI Turbo].)

4.  Verify that the APP sensor output signal (PID: APP1, APP2) is within the specification when the accelerator pedal is depressed and not depressed.

•  If not as specified, replace the accelerator pedal. (See ACCELERATOR PEDAL REMOVAL/INSTALLATION [MZ-CD 1.4 DI Turbo].)