PILOT BEARING INSPECTION [F35M-R]

id051005800200

1.  Refer to CLUTCH UNIT REMOVAL/INSTALLATION to remove the clutch unit until the pilot bearing is in a condition whereby it can be inspected. (See CLUTCH UNIT REMOVAL/INSTALLATION [F35M-R].)

2.  Without removing the pilot bearing, turn the bearing while applying force in the axial direction.

•  If there is any malfunction, replace the pilot bearing. (See CLUTCH UNIT REMOVAL/INSTALLATION [F35M-R].)

am2zzw00000156

3.  Install in the reverse order of removal.

4.  Add the specified amount of specified transaxle oil. (See TRANSAXLE OIL REPLACEMENT [F35M-R].)

Note

•  If the transaxle is overhauled and installed to the vehicle, perform the "INSPECTION AFTER TRANSAXLE INSTALLATION" and verify that there is no abnormality. (See INSPECTION AFTER TRANSAXLE INSTALLATION [F35M-R].)