TRANSAXLE RANGE (TR) SWITCH ADJUSTMENT [FN4A-EL]

id051701803700

Caution

•  Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it

•  Do not damage the terminals.

1.  Engage the parking brake and use wheel chocks at the front and rear of the wheels.

2.  Select the selector lever to N position.

3.  Perform the following procedures.

(1)  Disconnect the negative battery cable.

(2)  Disconnect the TR switch connector.

am2zzw00001002

4.  Loosen the TR switch.

(1)  Remove the clip and disconnect the selector cable.

am2zzw00005010

(2)  Loosen the TR switch installation bolts.

adejjw00001305

5.  Adjust the TR switch.

(1)  Verify that the TR switch is aligned with N position.

am2zzw00004872

(2)  Adjust the TR switch between terminals B and C until the resistance becomes specification.

am2zzw00001005

TR switch specification

713—787 ohms

(3)  Tighten the TR switch installation bolts.

Tightening torque

8—11 N·m {82—112 kgf·cm, 71—97 in·lbf}