TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR INSPECTION [DJVA-EL]

id051901285800

Caution
•  Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it.

On-Vehicle Inspection

1.  Disconnect the negative battery cable.

2.  Disconnect the coupler component connector.

am3zzw00008257

3.  Inspect the oil temperature sensor using a tester.

•  If there is any malfunction, replace the CVT. (See CVT (CONTINUOUSLY VARIABLE TRANSAXLE) REMOVAL/INSTALLATION [DJVA-EL].)
am3zzw00008258

TFT sensor specification

Terminal

CVT fluid temperature (°C {°F})

Continuity/Resistance (kilohm)
A—GND
Always
No continuity
B—GND
Always
No continuity
A—B
10 {50}
6.445
25 {77}
3.5
110 {230}
0.247


Wiring Harness Inspection

1.  Disconnect the negative battery cable.

2.  Remove the front side garnish. (See FRONT SIDE GARNISH REMOVAL/INSTALLATION.)

3.  Disconnect the TCM connector.

4.  Inspect the wiring harness between the coupler component and the TCM using a tester.

•  If there is any malfunction, repair or replace the wiring harness.
am3zzw00008454

TFT sensor specification

Terminal

CVT fluid temperature (°C {°F})

Continuity/Resistance (kilohm)
A11—GND
Always
No continuity
A12—GND
Always
No continuity
A11—A12
10 {50}
6.445
25 {77}
3.5
110 {230}
0.247