PID/DATA MONITOR TABLE
id080200320300
|
PID name (definition) |
Unit/Operation |
Operation Status (Reference) |
Terminal |
|---|---|---|---|
|
BUCKLE_D
(Driver-side buckle switch status)
|
Unbuckled/Buckled
|
• Driver-side front seat belt fastened (Driver-side buckle switch off) Buckled
• Driver-side front seat belt not fastened (Driver-side buckle switch on) Unbuckled
|
2M
|
|
BUCKLE_P
(Passenger-side buckle switch status)
|
Unbuckled/Buckled
|
• Passenger-side front seat belt fastened (Passenger-side buckle switch off) Buckled
• Passenger-side front seat belt not fastened (Passenger-side buckle switch on) Unbuckled
|
2O
|
|
ENG_ST
(Engine status)
|
Off/Ready/Cranking/Running/Stalled/
After Run/Shutdown/
Not Defined
|
• Ignition switch is at LOCK: Off
• Ignition switch is at ON: Ready
• Ignition switch is at START: Cranking
• Vehicle driven: Running
• After driving, engine stopped: Stalled
• After driving, engine stopped: After Run
• After driving, engine stopped: Shutdown
• Engine status unknown: Defined
|
-
|
|
P_BELT_SSR
(Occupancy sensor status)
|
Off/On
|
• Occupant seated in passenger-side front seat (occupancy sensor on): On
• Occupant not seated in passenger-side front seat (occupancy sensor off): Off
|
2J
|
|
RES_AB_D
(Driver-side air bag module resistance)
|
ohm
|
Continuous: 1.7–4.3 ohm
|
3E, 3G
|
|
RES_AB_P
(Passenger-side air bag module resistance)
|
ohm
|
Continuous: 1.5–3.3 ohm
|
3I, 3K
|
|
RES_CAB_D
(Driver-side curtain air bag module resistance)
|
ohm
|
Continuous: 1.5–3.6 ohm
|
1I, 1K
|
|
RES_CAB_P
(Passenger-side curtain air bag module resistance)
|
ohm
|
Continuous: 1.5–3.6 ohm
|
1M, 1O
|
|
RES_PT_D
(Driver-side pretensioner seat belt resistance)
|
ohm
|
Continuous: 1.7–3.5 ohm
|
2A, 2C
|
|
RES_PT_P
(Passenger-side pretensioner seat belt resistance)
|
ohm
|
Continuous: 1.7–3.5 ohm
|
2E, 2G
|
|
RES_SAB_D
(Driver-side side air bag module resistance)
|
ohm
|
Continuous: 1.5–3.6 ohm
|
1A, 1C
|
|
RES_SAB_P
(Passenger-side side air bag module resistance)
|
ohm
|
Continuous: 1.5–3.6 ohm
|
1E, 1G
|
|
VPWR
(SAS control module power voltage)
|
V
|
The ignition switch is at ON: B+
|
3A
|
|
VSPD
(Vehicle speed)
|
KPH
|
• Vehicle stopped: 0 KPH (0 MPH)
• Vehicle driven: Displays vehicle speed
|
-
|
|
PAD_IL_OFF
|
|
-
|
|
|
PAD_SW
|
|
-
|
|
|
PAD_SW_FLT
|
|
-
|
|