DTC U2100:00 [ADVANCED KEYLESS AND START SYSTEM]

id0902e1399000

Detection Condition

Possible Causes

Diagnostic Procedure

Step	Inspection		Action
1	PERFORM CONFIGURATION •  Perform the configuration for the keyless control module using the M-MDS. (See KEYLESS CONTROL MODULE CONFIGURATION [ADVANCED KEYLESS AND START SYSTEM].) •  Clear the DTCs using the M-MDS. (See CLEARING DTC [ADVANCED KEYLESS AND START SYSTEM].) •  Verify the DTCs using the M-MDS. (See DTC INSPECTION [ADVANCED KEYLESS AND START SYSTEM].) •  Is the DTC U2100:00 displayed?	Yes	Replace the keyless control module. (See KEYLESS CONTROL MODULE REMOVAL/INSTALLATION [ADVANCED KEYLESS AND START SYSTEM].)
		No	DTC troubleshooting completed.