REAR DOOR GLASS REMOVAL/INSTALLATION [4SD]

id091200000381

1.  Fully lower the rear door glass.

2.  Remove the rear beltline molding. (See REAR BELTLINE MOLDING REMOVAL/INSTALLATION.)

3.  To access the glass installation bolt, position the rear door glass so that the distance from the top of the rear door glass to the upper part of the rear beltline molding is approx. 210 mm {8.27 in}.

am2ccw00000200

4.  Disconnect the negative battery cable.

5.  Remove the sail inner garnish. (See SAIL INNER GARNISH REMOVAL/INSTALLATION.)

6.  Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION.)

7.  Remove the bolts and screw.

am3zzw00001910

8.  Remove the rear door glass guide and glass run channel as a single unit.

am2ccw00000201

9.  Remove the hole cover.

10.  Remove the screw.

am2zzw00005018

11.  Lift the rear door glass up and remove while tilting it.

12.  Install in the reverse order of removal.