TRUNK LID OPENER SYSTEM OPERATION [KEYLESS ENTRY SYSTEM]

id0914b3001100

1.  When pressing the trunk lid opener switch while the doors are unlocked, the trunk lid opener switch turns on and a trunk lid-open request signal is input to the BCM.

2.  The BCM unlocks the trunk lid release actuator for approx. 1.5 s when the ignition switch is in the LOCK position or all the following conditions are met.

•  Ignition switch in the ON position

―  Selector lever is in P position (ATX)

―  Parking brake is applied (parking brake switch is on (MTX))

―  Vehicle speed is 3 km/h {2 mph} or less

―  Driver’s door is unlocked

•  Ignition switch in the off position

―  Vehicle is stopping (There is no vehicle speed input)

―  Driver’s door is unlocked

Note

•  It requires approx. 1 to 2 s for the trunk lid release actuator to perform an open operation after the trunk lid opener switch is pressed.

3.  When the trunk lid release actuator motor operates, the latch lever is freed and the trunk lid lifts up simultaneously via the spring force of the trunk lid weatherstrip and stopper rubber, and opens.

am2zzn00001391