FRONT SIDE TURN LIGHT REMOVAL/INSTALLATION

id091800800900

Front Fender Panel Type

1.  Disconnect the negative battery cable.

2.  Move the front side turn light in the direction of the arrow (1) (toward the vehicle rear) and detach the tab.

am2zzw00003364

3.  Pull area A of the front side turn light in the direction of the arrow (2) and remove the front side turn light.

4.  Disconnect the front side turn light connector.

5.  Install in the reverse order of removal.

Caution

•  Always assemble the front side turn light with the tab towards the vehicle rear.

Power Outer Mirror Type

1.  Disconnect the negative battery cable.

2.  Remove the outer mirror glass. (See OUTER MIRROR GLASS REMOVAL.) (See OUTER MIRROR GLASS INSTALLATION.)

3.  Remove the outer mirror garnish. (See OUTER MIRROR GARNISH REMOVAL.) (See OUTER MIRROR GARNISH INSTALLATION.)

4.  Disconnect the connector.

am2zzw00006932

5.  Remove the screw.

6.  Remove the front side turn light in the direction of the arrow (2) shown in the figure while pressing the tabs of the front side turn light in the direction of the arrow (1).

Caution

•  If the tabs of the front side turn light are detached, the front side turn light may fall off and be damaged. When detaching the tabs of the front side turn light, hold the front side turn light with a hand during the servicing.

7.  Install in the reverse order of removal.