INTERIOR LIGHT INSPECTION

id091800801600

Vehicles With Intruder Sensor

1.  Disconnect the negative battery cable.

2.  Remove the intruder sensor. (See INTRUDER SENSOR REMOVAL/INSTALLATION.)

3.  Remove the lens. (See INTERIOR LIGHT BULB REMOVAL/INSTALLATION.)

4.  Remove the interior light. (See INTERIOR LIGHT REMOVAL/INSTALLATION.)

5.  Verify that the continuity between the interior light terminals is as indicated in the table.

am2zzw00004962

•  If not as indicated in the table, replace the interior light.

am2zzw00004963

Vehicles Without Intruder Sensor

1.  Remove the following parts:

(1)  A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(2)  Sunvisor (See SUNVISOR REMOVAL/INSTALLATION.)

(3)  Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION.)

(4)  Rain sensor cover (vehicles with rain sensor) (See RAIN SENSOR REMOVAL/INSTALLATION.)

2.  Remove the interior light. (See INTERIOR LIGHT REMOVAL/INSTALLATION.)

3.  Set the headliner out of the way.

4.  Verify that the continuity between the interior light terminals is as indicated in the table.

am2zzw00004964

•  If not as indicated in the table, replace the interior light.

am2zzw00004965