HIGH-MOUNT BRAKE LIGHT REMOVAL/INSTALLATION

id091800802000

5HB/3HB

1.  Disconnect the negative battery cable.

2.  Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)

3.  Remove tabs A (4 locations).

am2zzw00002284

4.  Remove the high-mount brake light while removing tabs B (4 locations).

5.  Disconnect the connector.

6.  Install in the reverse order of removal.

4SD

1.  Disconnect the negative battery cable.

2.  Remove the trunk lid trim. (See TRUNK LID TRIM REMOVAL/INSTALLATION [4SD].)

3.  Disconnect the socket.

am2zzw00004830

4.  Remove the nuts.

5.  Disengage the tabs by pressing both ends of the lens in the directions indicated by the arrows and remove the high-mount brake light.

am2zzw00004911

6.  Install in the reverse order of removal.