TORQUE CONVERTER INSPECTION
id051700661800
-
Caution
-
• For the torque converter inspection, only an inspection for burning or seizure of the TCC can be performed. For other malfunctions, on-vehicle inspection is required.
1. Assemble the drum and shaft component to the torque converter.
2. With the torque converter secured by hand, rotate the drum and shaft component.
-
Note
-
• When rotating the drum and shaft component, a little force is required depending on the amount of ATF in the torque converter.
A :Secure by hand
-
• If the drum and shaft component cannot be rotated, burning or seizure of the TCC can be considered, therefore replace the torque converter with a new one.
3. Remove the drum and shaft component.